Olympus Stylus Verve - Manual (Page 18)

Inserting and removing the picture card
18
En
Orient the card and insert it into
the spring-loaded card slot as
shown.
The card will lock into place when
fully inserted.
Push the card in as far as it will go.
The card can only be inserted one way; inserting it with incorrect
orientation or obliquely may cause damage to the connectors and the
card may get stuck in the camera.
If the card is not fully inserted in place, the pictures may not be stored
on the card.
Close the card cover.
Close the battery compartment/
connector cover as indicated by the
arrow.
If the card cover is open, the battery compartment/connector cover cannot
be closed.
Card
000e_kisohen.book Page 18 Friday, July 30, 2004 7:06 PM