Olympus FE-290 - Manual (Page 26)

Menu operations
26
EN
The date and time is saved with each image, and is used in the file name. If the date and
time are not set, the [
X] screen is displayed each time the camera is turned on.
To play back camera images on a TV, set the video output according to your TV’s video
signal type.
• TV video signal types differ by country/region. Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
X
........................................................................................................ Setting the date and time
VIDEO OUT ............................................................................... Playing back pictures on a TV
NTSC /PAL
The factory default settings differ according to the region where
the camera is sold.
POWER SAVE ...................................................Setting the camera to the power save mode
OFF /ON
When no operation has been performed for approximately 10
seconds while in shooting mode, the monitor automatically shuts
off. Pressing the zoom lever or other buttons restores the
camera from power save mode.
MENU
TIME TIME D M Y
---- ---- .--.-- --:-- .--.-- --:--
CANCEL
Y / M / Y / M / D
Y-M-D
Cancels the setting
Hour
Date formats
(Y-M-D, M-D-Y, D-M-Y)
Minute
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-
hour format.
• To set the time precisely, with the
cursor on either “Minute” or “Y/M/
D”, press
H as the time signal
strikes 00 seconds.
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer
to your TV’s instruction manual.
• Images and the information displayed on the
screen may be cropped depending on the
TV’s settings.
Settings on the camera
Turn the camera on and press
q to select
the playback mode.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
Connect to the TV’s video
input (yellow) and audio input
(white) terminals.
AV cable (provided)
Connector cover Multi-connector
d4347_e_0000_7.book Page 26 Tuesday, July 17, 2007 11:23 AM