Olympus SZ-11 - Manual (Page 51)

51 EN
Setting the date and time [ Setting the date and time [
X X]]
t (Settings 3) 
X
“Date, time, time zone, and language” (p. 15).
To check the date and time To check the date and time
Press the INFO button while the camera is turned off. The current time is displayed for approx. 3 seconds.
Choosing home and alternate time zones [World Time] Choosing home and alternate time zones [World Time]
t (Settings 3)  World Time
You will not be able to select a time zone using [World Time] if the camera clock has not fi rst been set using [
X].
Submenu 2 Submenu 3 Application
Home/Alternate
x The time in the home time zone (the time zone selected for x in submenu 2).
z
The time in the travel destination time zone (the time zone selected for z in
submenu 2).
x *1 — Select the home time zone ( x).
z *1, 2 — Select the travel destination time zone (
z).
*1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone ( x) to display the time in the travel destination time zone (z).
Restoring data in the camera [Reset Database] Restoring data in the camera [Reset Database]
t (Settings 3)  Reset Database
Playback will become available by performing [Data Repair] when the Photo surfi ng function is not activated
properly. However, data such as collections and other groups created with the [ib] (PC software) is deleted from the
database in the camera.
Import the data back into the camera from a computer to playback the data created with the [ib] (PC software).