Connecting the camera, Playback on a tv – Olympus Stylus 1030 SW User Manual
Page 16
En
16
Connecting the camera
Use the AV cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1
Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the AV cable.
2
Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3
Set the mode dial to
q, and press o to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad
to select the picture
you want to display.
Playback on a TV
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover
d4354_basic_e_00.book Page 16 Tuesday, December 18, 2007 5:26 PM