Olympus LS-10 - Manual (Page 25)

25
Ab
ou
t R
ec
or
din
g
2
Recording
To MIC jack
Applicable External Microphones
(optional) (☞ P.65)
Stereo microphone: ME51S
The ME51S Stereo microphone comes in a set with
an extension cord and a clip.
2 channel microphone (non-directional): ME30W
These are highly sensitive non-directional micro-
phones supported by plug-in power which are
well-suited to recording musical performances.
Highly sensitive noise-cancellation monaural
microphone (unidirectional): ME52W
This microphone is used to record sound at a
distance while minimizing surrounding noise.
Tie clip microphone (non-directional): ME15
Small concealing microphone with a tie-clip.
Telephone pickup: TP7
Earphone type microphone can be plugged into your
ear while phoning. The voice or conversation over
the phone can be clearly recorded.
Recording with External Microphone:
Connect an external microphone to the
MIC jack of the recorder.
• When recording while an external monaural
microphone is connected, sound will only be
recorded by the L-channel.
Recording from External
Microphone or Other Devices
The external microphone and other devices can
be connected and the sound can be recorded.
Connect as follows by the device to be used.
• Do not plug and unplug devices into the
recorder’s jack while it is recording.
[HIGH]:
This is a highly sensitive mode which can
record surrounding noises.
[LOW]:
This is the standard level of microphone
sensitivity. Select this mode for cases
where the volume of the source sound is
high, such as a band performance.
Note
• When you would like to clearly record a
speaker’s voice, set the recorder to [LOW] and
hold its built-in stereo microphone close to the
speaker’s mouth (5-10 cm) before recording.
Notes
• The built-in microphone will become inoperable
when an external microphone is plugged into
the recorder’s MIC jack.
• Microphones supported by plug-in power can
also be used. When the plug-in power function
is set to [On] power will be supplied by the
device to the microphone ( ☞ P.34, P.37).
• Turn the plug-in power function to [Off] when
an external microphone not supported by
plug-in power is connected, as there is the risk
that noise may be generated while recording
( ☞ P.34, P.37).
• Do not connect the connecting cord to the
LINE IN jack when recording from external
microphone with this recorder.