Olympus FE-5050 - Manual (Page 5)

Shooting with the optimum
aperture value and shutter speed
[PROGRAM AUTO]
1
Press the n button to turn on the camera.
If the [PROGRAM AUTO] indicator is not displayed,
press the H button to display the function menu and
then set the shooting mode to P.
Press the n button again to turn off the camera.
2
Hold the camera and compose the shot.
3
Press the shutter button halfway down to focus on
the subject.
When the camera focuses on the subject, the exposure is
locked (shutter speed and aperture value are displayed),
and the AF target mark changes to green.
The camera was unable to focus if the AF target mark
À ashes red. Try focusing again.
4
To take the picture, gently press the shutter button
all the way down while being careful not to shake
the camera.
Using the Á ash
1
Select the À ash option in the shooting function
menu.
2
Use HI to select the setting option, and press the
H button to set.
Viewing images
1
Press the q button.
2
Use HI to select an image.
Erasing images during playback
(Single image erase)
1
Display the image you want to erase and press G
( ).
2
Press FG to select [ERASE], and press the
H button.
Ɣ
Ɣ
EN
Charging the battery with the
supplied USB-AC adapter
The included F-2AC USB-AC adapter (with an AC cable
or plug-in type; hereafter referred to as USB-AC adapter)
differs depending on the region where you purchased the
camera. If you received a plug-in type USB-AC adapter,
plug it directly into an AC outlet.
Example: USB-AC adapter with an AC cable
1
2
3
1
AC outlet
USB cable (supplied)
Multi-connector
When the camera is connected to another device via
USB, a message will be displayed prompting you to
choose a connection type. Select [CHARGE].
The battery is not fully charged at the time of purchase.
Before use, be sure to charge the battery until the
indicator lamp turns off (up to 3 hours).
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-AC
adapter may not be functioning as expected.
Date, time, time zone, and
language
1
Press the n button to turn on the camera.
The date and time setting screen is displayed when the
date and time are not set.
2
Use FG to select the year for [Y].
3
Press I to save the setting for [Y].
4
As in Steps 2 and 3, use FGHI and the H button
to set [M] (month), [D] (day), [TIME] (hours and
minutes), and [Y/M/D] (date order).
5
Use HI to select your home time zone and press
the H button.
Use FG to turn daylight saving time ([SUMMER]) on
or off.
6
Use FGHI to select your language and press the
H button.
Ɣ
Ɣ
D4450-48_QSG_EFS.indd 1 2010/06/21 19:12:42