Olympus WS-560M - Manual (Page 41)

41
4
EN
Menu setting method
Menu setting method
1
Select [SRS 3D] or [TruBass].
[SRS 3D]:
The surround effect can be adjusted.
The expansive feel and clarity of the
sound can be increased.
[TruBass]:
The low-frequency range can be
adjusted. The low-frequency range
can be made richer.
2
Adjust the surround level or bass
effect level.
[High] [Middle] [Low]:
The sound quality can be adjusted to
one of 3 levels.
[Off]:
Disables this function.
• The SRS WOW XT eff ect will be weakened
if the bit rate for any music fi le is less than
32 kbps.
• Depending on the song, the SRS WOW XT
eff ect will be heightened, and may sound
like noise. If this happens, adjust the
SRS WOW XT eff ect.
• Set [WOW] to [Off] to use the slow
playback or fast playback mode.
Otherwise you cannot use these
functions (
☞ P.42).
Equalizer
If you change the equalizer setting, you can
enjoy the music with your favorite sound
quality.
1
Select the desired equalizer
characteristics.
[Off]:
Disables the equalizer function.
[Rock] [Pop] [Jazz]:
Enables the equalizer function.
[User]:
Select
[User] to save your own
custom equalizer settings. If [User] is
selected, proceed to Step 2.
2
Select the frequency band.
[60 Hz] [250 Hz] [1 kHz] [4 kHz] [12 kHz]:
Select the frequency bandwidth
setting.
3
Select the equalizer level.
• You can select the equalizer level from
[–6] to [+6] in 1dB increments.
• The higher the decibel value, the louder
the sound.
• To change the settings again, press the
9 or 0 button and repeat the
procedure from step 2.
Play Mode
You can select the playback mode that fits
your preference.
Select the desired playback range:
1
Select [Play Area].
2
Select [File], [Folder] or [All].
[File]:
Selects the current file.
[Folder]:
Selects the current folder.
[All]:
Selects all files in the internal
memory.
Select the desired playback mode:
1
Select [Repeat] or [Random].
[Repeat]:
Sets to repeat playback mode.
[Random]:
Sets to random playback mode.
For WS-570M/WS-560M/
WS-550M:
• Set to [MUSIC] mode.