Olympus X-960 - Manual (Page 11)

11 EN
Charging the camera battery
The camera battery can be charged while the
camera is connected to a computer.
The indicator lamp lights during charging and turns
off when charging is complete.
Charging takes up to 3 hours.
If the indicator lamp does not light, the
camera is not correctly connected or the
battery, camera, or USB cable may be
damaged.
Installing the computer software (ib)
For information on using the computer
software (ib), see the software’s online help.
1
Insert the supplied CD in a CD-ROM
drive.
A setup screen will appear on the computer
monitor.
If the setup window is not displayed,
select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7)
from the start menu. Double-click the
icon for the CD-ROM drive to open the
setup CD window and then double-click
“CameraInitialSetup.exe”.
2
Connect the camera to the
computer.
If nothing is displayed on the camera
monitor when the camera is connected,
the battery may be exhausted. Leave the
camera connected to the computer until the
battery has charged, then disconnect and
reconnect the camera.
3
Follow the on-screen instructions
on your computer.
●
●
Charging the battery and
installing the supplied
computer software (ib)
After checking the system requirements, follow
the instructions below to connect the camera to
a computer, charge the battery, and install the
supplied computer software (ib).
System requirements
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
If your system does not meet the system
requirements or if you do not use a
computer, charge the battery using the
supplied USB-AC adapter. “Charging the
battery with the supplied USB-AC adapter”
(p. 12)
Connecting the camera
FE-4030 FE-5030/X-960
Multi-connector
Connector
cover
USB cable (supplied)
Computer (on
and running)
Indicator lamp