Digital zoom zooming in on your subject, Af mode changing the focusing area, P. 25 – Olympus µ 790 SW User Manual

Page 25: Me nu opera tions

Advertising
background image

Me

nu opera

tions

EN

25

You can take a sequence of pictures at one time by holding down the shutter button. The
camera will take pictures continuously until you release the shutter button.
• When [

W] is selected, the following setting restrictions apply.

• The flash mode is fixed at [

$].

• [ISO] is fixed at [AUTO].
• [IMAGE QUALITY] is limited to [2048 × 1536] and lower.

This function allows you to zoom up to XXx by combining the optical zoom and image
cropping. This function will not reduce the image quality since it dose not convert the data with
fewer pixels into the data with larger pixels.
• The available zoom factor varies depending on the [IMAGE QUALITY] setting. This function

cannot be set when [IMAGE QUALITY] is set to [SHQ] or [HQ].

The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 15×)
• This function cannot be set when [FINE ZOOM] is [ON].

FINE ZOOM

............................. Zooming in on your subject without reducing image quality

OFF

/ON

DIGITAL ZOOM

............................................................................ Zooming in on your subject

OFF

/ON

ESP/n

................................... Changing the area for measuring the brightness of a subject

ESP

Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.

n

Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.

AF MODE

....................................................................................... Changing the focusing area

FACE
DETECT

The camera searches a face within the frame and focus on it.

iESP

The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.

SPOT

Focus selection is based on the subject within the AF target mark.

P

[IN

IN]

44

[

]

HQ

HQ 3072

3072

×

2304

2304

P

[IN

IN]

44

[

]

HQ

HQ 3072

3072

×

2304

2304

Zoom bar
White area: The optical zoom area
Red area: The digital zoom area

Optical zoom

Digital zoom

Advertising