Olympus VR-360 - Manual (Page 48)

48 EN
Saving battery power between shots Saving battery power between shots
[Power Save]
[Power Save]
d (Settings Menu 2)  Power Save
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save battery
power.
To resume standby mode To resume standby mode
Press any button.
Changing the display language [ Changing the display language [ W W]]
d (Settings Menu 2)  W
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
1 Use FGHI to select your language and press the
Q button.
Setting the date and time [ Setting the date and time [ X X]]
d (Settings Menu 2)  X
“Language, date, time, and time zone” (p. 15)
Switching between home and travel destination time zones [World Time] Switching between home and travel destination time zones [World Time]
d (Settings Menu 2)  World Time
You will not be able to select a time zone using [World Time] if the camera clock has not fi rst been set using [ X].
Submenu 2 Submenu 3 Application
Home/Alternate
x
The time in the home time zone (the time zone selected for x in
submenu 2).
z
The time in the travel destination time zone (the time selected for z in
submenu 2).
x *1 — Select the home time zone (x).
z *1, 2 — Select the travel destination time zone ( z).
*1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone (x) to display the time in the travel destination time zone (z).