Olympus FE-140 - Manual (Page 64)

64
Get
ting t
o
know your camera bet
te
r
5
Monitor indication Possible cause Corrective action
This card cannot be
used in this camera. Or,
the card is not formatted. Format the card or replace.
• Select [POWER OFF] and press
F.
Insert a new card.
• Select [FORMAT] [YES] and press
F. All data on the card is erased.
There is an error in the
internal memory. Select [MEMORY FORMAT]
[YES] and press F. All data in the
internal memory is erased.
NO CONNECTION
The camera is not
connected to the printer
correctly. Disconnect the camera and connect
it again correctly.
NO PAPER
There is no paper in the
printer. Load some paper in the printer.
NO INK
The printer has run out
of ink. Replace the ink cartridge in the
printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper tray
has been removed or
the printer has been
operated while changing
settings on the camera. Do not operate the printer while
changing settings on the camera.
PRINT ERROR
There is a problem with
the printer and/or
camera. Turn off the camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
r
CANNOT PRINT
Pictures recorded on
other cameras may not
be printed on this
camera. Use a computer to print.
OK SET
CARD SETUP
POWER OFF
FORMAT
OK SET
POWER OFF
MEMORY FORMAT
MEMORY SETUP