Olympus VR-310 - Manual (Page 47)

47 EN
For information on using the menus, see “Using the Menu” (p. 4).
Saving battery power between shots Saving battery power between shots
[Power Save]
[Power Save]
s (Settings 2) X Power Save
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save battery
power.
To resume standby mode To resume standby mode
Press any button.
Changing the display language [ Changing the display language [ W W]]
s (Settings 2) X W
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
1 Use FGHI to select your language and press the
Q button.
Setting the date and time [ Setting the date and time [ X X]]
s (Settings 2) X
X
To select the date display order To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
02 26 12 30
: . .
2011
OK Set
X
Y M D Time
MENU Cancel
Y/M/D Y/M/D
Date order
2 Press the Q button to complete the operation.
“Date, time, time zone, and language” (p. 17)
Switching between home and travel Switching between home and travel
destination time zones [World Time]
destination time zones [World Time]
s (Settings 2) X World Time
You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been set
using [
X].
Submenu 2 Submenu 3 Application
Home/
Alternate
x
The time in the home time
zone (the time zone selected
for x in submenu 2).
z
The time in the travel
destination time zone
(the time selected for
z in
submenu 2).
x *1 —
Select the home time zone
(x).
z *1, 2 —
Select the travel destination
time zone (
z).
*1 In areas where daylight saving time is in effect, use
FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically
calculates the time difference between the selected
zone and the home time zone (x) to display the time in
the travel destination time zone (
z).