Recording sound with still pictures – Olympus SP-350 User Manual

Page 74

Advertising
background image

Recording sound with still pictures

74

5

Ad

dit

io

n

al sh

o

o

ti

ng

fu

ncti

on

s

1

Use the arrow pad to choose at
which edge you want to
connect the pictures.

q : The next picture is connected at

the right edge.

p : The next picture is connected at

the left edge.

s : The next picture is connected at

the top.

r : The next picture is connected at the bottom.

2

Make sure that the edges of the pictures overlap, then take
the pictures.

• The focus, exposure and white balance are set by the first picture. Do not

select an extremely bright subject (such as the sun) for the first picture.

• You cannot adjust the zoom after the first picture.
• Panorama shooting is possible for up to 10 pictures. When you have taken

10 pictures, a warning mark

g is displayed.

3

Press

Z to exit panorama shooting.

Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.

Top menu

[MODE MENU]

[CAMERA]

[R]

[ON]

g“Using the menus” (P. 17)

Note

• Panorama mode is not available when there is no card in the camera.

Panorama mode is only available with Olympus cards.

• During panorama shooting, the flash, sequential shooting, and recording sound

with still pictures are not available.

• The camera itself cannot connect panorama pictures. The OLYMPUS Master

software is necessary to connect the pictures.

Connects pictures from

left to right

Recording sound with still pictures

Advertising