Olympus 9000 - Manual (Page 22)

 EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a time delay.
1
Press the
Y button.
OFF
P
OK OK
12 M
N
ORM
SET
SELFTIMER
OFF
ON
Y Y Y
2
Use
kl to select the setting
option, and press the
n button to
set.
Item Description
OFF This cancels the self-timer.
ON
The self-timer lamp turns on for
approx. 10 seconds, and then
blinks for approx. 2 seconds, and
then the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Changing the shooting
information display
The display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
1
Press the
g button.
The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
Normal
No information
Histogram
Grid
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
appear mostly black.
The green section shows
the luminance distribution in the
center area of the monitor.
●