Olympus E-450 - Manual (Page 12)

12
EN
Attaching a lens to the camera
Rear cap
Body cap
Lens cap
Lens attachment
mark (Red)
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera
and the rear cap from the lens
2
Attach a lens to the camera
3
Remove the lens cap
(3, 4)
Removing the lens from the
camera
While pressing the lens release button
(1), rotate the lens in the direction of
the arrow (2).
• Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera’s body (1).
• Rotate the lens in the direction
indicated by the arrow until you
hear it click (2).
• Make sure the power switch is set
to OFF.
• Do not press the lens release
button.
E-450_MASTER.fm Seite 12 Donnerstag, 16. April 2009 10:40 10