Olympus FE-110 - Manual (Page 13)

How to use the direct buttons
13
1
Basi
c operation
Basic functions can be easily operated using the direct buttons. Use the arrow pad
and
i to make settings. Follow the buttons displayed on the screen to select and
make each setting.
How to set the flash mode using
is shown below.
1
Press in shooting mode.
• The flash mode selection screen is displayed.
2
Press [\ to select a flash mode.
3
Press i.
• The camera is ready to shoot.
• If not used for 3 seconds, the camera applies the current settings, and the
setting screen disappears.
Using the direct buttons
Current setting
Operating guide
Selected setting