Shooting tips, Focusing on the subject, Subjects that are difficult to focus on – Olympus 750 User Manual

Page 52: Prevent blur by using image stabilization

Advertising
background image

52

EN

Get

ti

ng

t

o know your camera

be

tt

er

There are several ways to focus, depending on the subject.

When the subject is not in the center of the frame

• Place the subject in the center of the frame, lock the focus on the subject, and then

recompose your picture.

• Set [AF MODE] to [iESP].

g “AF MODE Changing the focusing area” (P. 21)

The subject is moving quickly

• Focus the camera on a point roughly the same distance away as the subject you want

to shoot (by pressing the shutter button halfway), and then recompose your picture and
wait for the subject to enter the frame.

• Under certain types of conditions, it is difficult to focus using auto focus. The green lamp

on the monitor lights, allowing you to check if the focus is locked.

In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the
picture. If the subject has no vertical lines, hold the camera vertically and focus
the camera using the focus lock function by pressing the shutter button halfway,
and then return the camera to the horizontal position while keeping the button
pressed halfway and take the picture.

Hold the camera in a correct posture and press the shutter button slowly. To stabilize the digital
image, take pictures with

h pressed (Stylus750/

µ750) or the mode dial set to h (Stylus740/

µ740).
The digital images are not stabilized when:

• images are shot using a zooming function of high magnification, i.e., using both optical

zoom and digital zoom functions,

• the object is dark and the shutter speed is slow, or
• the flash cannot be used or when a low shutter speed set

s mode is selected.

Shooting tips

Focusing on the subject

Subjects that are difficult to focus on

Prevent blur by using image stabilization

The green lamp
blinks.
The subject cannot be
brought into focus.

Subject with low
contrast

Subject with an
extremely bright
area in the center
of the frame

Subject without
vertical lines

Subjects at
different distances

Fast-moving
subject

The subject is not
in the center of the
frame

The green lamp
lights, but the
subject cannot be
brought into focus.

d4314_15_e.book Page 52 Friday, July 14, 2006 2:47 PM

Advertising
This manual is related to the following products:

740