Olympus VN-711PC - Manual (Page 33)

33
4
EN
Menu setting method
M
e
nu
set
ting
m
e
th
od
Play Menu
Noise Cancel
Note
• When a recording scene is selected,
recording-related menu settings cannot
be changed. If you wish to use these
functions, set [ Rec Scene ] to [ Off ].
For VN-713PC:
If recorded audio is difficult to understand
because of noisy surroundings, adjust the
Noise Cancel setting level.
1 Select [ Noise Cancel ] from the
menu on the [ Play Menu ].
[ High ] [ Low ]: Enables the Noise Cancel
function. Noise will be reduced in the
file when it’s played back for better
sound quality.
[ Off ]: Disables this function.
Note
• When using the [ Noise Cancel ] function,
the following functions are not available.
• Slow/Fast speed playback (
☞ P.21)
• [ Voice Filter ] (VN-713PC, VN-712PC
only)
Voice Filter
The recorder has a Voice Filter Function to
cut low and high frequency tones during
normal, fast, or slow playback, and enable
clear audio playback.
1 Select [ Voice Filter ] from the
menu on the [ Play Menu ].
[ On ]:
Enables the Voice Filter function.
[ Off ]:
Disables this function.
Note
• When using the [ Voice Filter ] function,
the following functions are not available.
•
[ Noise Cancel ] (VN-713PC only)
For VN-713PC, VN-712PC:
Play Mode
You can select the playback mode that fits
your preference.
1 Select [ Play Mode ] from the
menu on the [ Play Menu ].
When [ Playback range ] is selected:
[ File ]:
Selects the current file.
[ Folder ]
Selects the current folder.
When [ Repeat ] is selected:
[ On ]:
Sets to repeat playback mode.
[ Off ]:
Disables this function.
Notes
• In [ File ] mode, when the recorder comes
to the end of the last file in the folder,
[ End ] flashes for two seconds on the
display and the recorder stops at the start
of the last file.