Olympus FE-5010 - Manual (Page 29)

29 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Creating an index of 9 frames from a
movie [INDEX]
I
EDIT
X INDEX
INDEX
SET OK MENU BACK
1 Use mn to select a movie, and press the
B button.
2 Useklmn to select the fi rst frame,
and press the B button.
3 Use klmn to select the last frame,
and press the B button.
9 frames are extracted from a movie and
saved as a new still image (INDEX).
Protecting images [
0]
J
PLAYBACK MENU
X 0
Protected images cannot be erased by
[ERASE] (p. 16), [SEL. IMAGE], or [ALL
ERASE] (p. 30), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 31).
Submenu 2 Application
OFF Images can be erased.
ON
Images are protected so that
they cannot be erased except
by formatting of the internal
memory/card.
1 Use mn to select an image.
2 Use kl to select [ON].
3 If necessary, repeat Steps 1 and 2
to protect other images, and press the
B button.
●
Rotating images [y]
J
PLAYBACK MENU
X y
Submenu 2 Application
U +90°
The image is rotated 90°
clockwise.
V 0° The image is not rotated.
t –90°
The image is rotated 90°
counter-clockwise.
1 Use mn to select an image.
2 Use kl to select the rotation
direction.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the B button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
J
PLAYBACK MENU
X R
Submenu 2 Application
YES
The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.
NO No sound is recorded.
1 Use mn to select an image, and press the
B button.
2 Aim the microphone towards the sound
source.
Microphone
3 Use kl to select [YES], and press
the B button.
Recording starts.
●