Olympus E-620 User Manual
Page 89
89
EN
Pla
y
back functi
ons
6
x
Notes
• Red-eye correction may not work depending on the image. Red-eye correction may affect
other parts of the image, as well as the eyes.
• Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when there is not
enough space in the card memory, when an image is recorded on another camera.
• When resizing ([
Q]) an image, you cannot select a larger number of pixels than was
originally recorded.
• [
P] and [ASPECT] can only be used to edit images with an aspect ratio of 4:3 (standard).
Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is saved.
1
MENU[q][EDIT][IMAGE OVERLAY]
2
Select the number of frames to overlay and press the
i button.
3
Use
p to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the
i button again.
4
Use
hi to select an image, then use fg to
select the gain for each image. Press the
i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.
5
Use
fg to select [YES], then press the i
button.
To overlay 4 or more frames:
j To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]
repeatedly.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are
displayed.
Image overlay
TIPS
IMAGE OVERLAY
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
RAW
BACK
SET
x0.3
x0.3
x0.1
x0.1
x0.3
x0.3
IMAGE OVERLAY
BACK
SET
E-620_MASTER.fm Seite 89 Dienstag, 17. Februar 2009 11:04 11