Olympus TG-310 - Manual (Page 54)

54 EN
For information on using the menus, see “Setup menu” (p. 6).
To select the date display order To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
Date order
02 26 00 00
: . .
2011
MENU OK Set Cancel
X
Y M D Time
Y/M/D Y/M/D
2 Press the A button to set.
Choosing home and alternate time Choosing home and alternate time
zones [World Time]
zones [World Time]
t (Settings 3) X World Time
You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been set
using [
X].
Submenu 2 Submenu 3 Application
Home/
Alternate
x
The time in the home time
zone (the time zone selected
for x in submenu 2).
z
The time in the travel
destination time zone (the
time zone selected for
z
in submenu 2).
x *1 —
Select the home time zone
(x).
z *1, 2 —
Select the travel destination
time zone (
z).
*1 In areas where daylight saving time is in effect, use
FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically
calculates the time difference between the selected
zone and the home time zone (x) to display the time in
the travel destination time zone (
z).
Restoring data in the camera Restoring data in the camera
[Data Repair]
[Data Repair]
t (Settings 3) X Data Repair
Playback will become available by performing [Data
Repair] when the Photo surfi ng function is not
activated properly. However, data such as collections
and other groups created with the ib (PC software) is
deleted from the database in the camera.
Import the data back into the camera from a computer
to playback the data created with the ib (PC software).
Operating the camera by tapping the Operating the camera by tapping the
body [Tap Control]
body [Tap Control]
(TG-610 only) (TG-610 only)
t (Settings 3) X Tap Control
Submenu 2 Application
Off Cancels [Tap Control].
On [Tap Control] is activated.
Calibrate
Adjusts the tap strength and
intervals between multiple taps
on each side of the camera body.
(top, left, right, & back)
Operating during shooting mode Operating during shooting mode
(Example: Flash mode)
(Example: Flash mode)
1 Tap the right or left side of the camera body once.
Then tap the top side of the camera once.
The fl ash mode selection screen is displayed.
2 Tap the right or left side of the camera body to select a
function.
●