Olympus µ-5000 - Manual (Page 21)

1 EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a time delay.
1
Press the
Y button.
OFF
P
OK OK
12 M
N
ORM
SET
SELFTIMER
OFF
ON
Y
2
Use AB to select the setting option,
and press the E button to set.
Item Description
OFF This cancels the self-timer.
ON
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Changing the shooting
information display
The display of shooting information on the monitor
can be changed to best match the situation; for
example, the information can be removed if there is
a need for a clear view of the subject or a grid can
be displayed to assit with precise composition.
1
Press the
g button.
The displayed shooting information changes in the
order shown below each time the button is pressed.
“Shooting mode display” (p. 8)
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
Normal
No information
Histogram
Grid
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
appear mostly black.
The green section shows
luminance distribution
within the screen’s center.
●