Olympus µ 820 - Manual (Page 17)

Butt
on op
erati
on
s
EN
17
Press
q in shooting mode to switch to playback mode and display the last picture taken.
Press
q again or press the shutter button halfway to return to shooting mode.
g “q Viewing still pictures/Selecting playback mode” (P. 13)
When a printer is connected to the camera, display the picture you want to print in playback
mode and press
<.
g “EASY PRINT” (P. 39)
Press
f in shooting mode to turn on or off Shadow Adjustment Technology. Press e to
set. A rectangular frame appears on the detected shadowy area. This function makes the
subject’s face appear brighter even against backlight and enhances the background in the
picture.
• There may be cases in which the camera cannot detect a face.
• When [SHADOW ADJ. ON] is selected, the following setting restrictions apply.
• [ESP/n] is fixed at [ESP].
• [AF MODE] is fixed at [FACE DETECT].
• [PANORAMA] is not available.
• When [DRIVE] is set to [
W], this function activates only for the first shot.
• In some cases, it takes some time to display a detection frame.
In playback mode, select the picture you want to erase, and press
S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g “0 Protecting pictures” (P. 33)
q/< button
Viewing pictures/Printing pictures
q Viewing pictures immediately
< Printing pictures
f/S button
Brightening the subject against backlight/Erasing pictures
f Brightening the subject against backlight
SHADOW ADJ. OFF Shadow Adjustment Technology is deactivated.
SHADOW ADJ. ON Shadow Adjustment Technology is activated.
S Erasing pictures
b
c