Olympus µ TOUGH-6000 - Manual (Page 46)

 EN
Saving battery power between shots
[POWER SAVE]
E
SETUP  POWER SAVE
Submenu 2 Application
OFF Cancels [POWER SAVE].
ON
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode
Press any button or turn the mode dial.
Using the LED illuminator as an
auxiliary light [LED ILLUMINATOR]
E
SETUP  LED ILLUMINATOR
Submenu 2 Application
OFF Disables the LED illuminator.
ON Enables the LED illuminator.
“Using the LED illuminator” (p. 22)
Operating the camera by tapping the body [TAP CONTROL]
E
SETUP  TAP CONTROL
Submenu 2 Application
OFF Cancels [TAP CONTROL].
ON [TAP CONTROL] is activated.
CALIBRATE
Adjusts the tap strength and intervals between multiple taps on each side of the camera
body. (top, left, right, & back)
Functions available when [TAP CONTROL] is set to [ON]
Camera’s top [TOP]: Tap twice
Confirms the selected menu.
Switches [TAP CONTROL] to [ON] or [OFF]. (p. 4)
●
●
Camera’s right side [RIGHT]: Tap once
Sets the flash mode. (p. 20)
Camera’s back [BACK]: Tap once
Switches to playback mode. (p. 47)
Camera’s left side [LEFT]:
Tap once
Sets the macro mode. (p. 21)