Olympus EM10 - Manual (Page 94)

94 EN
Menu functions (Custom menus)
7
X K/Color/WB
Option Description g
K Set You can select the JPEG image quality mode from
combinations of three image sizes and four compression
rates.
1) Use HI to select a
combination ([K1] –
[K4]) and use
FG to
change.
2) Press Q. F
1
SF Y
2
F X
3
N W
4
SF W
D Set
Pixel Count
Back Set
Compression
rate Image size
67
Pixel Count Choose the pixel count for [X]- and [W]-size images.
1) Select [Xiddle] or
[Wmall] and press I.
2) Choose a pixel count
and press Q.
X iddle
W mall
2560Ч1920
1280Ч960
Pixel Count
Set Back
67
Shading Comp. Choose [On] to correct peripheral illumination according to
the type of lens.
• Compensation is not available for teleconverters or
extension tubes.
• Noise may be visible at the edges of photographs taken at
high ISO sensitivities.
—
WB Set the white balance. This is the same as the live control
setting. You can also fi ne-tune the white balance for each
mode. You can also make fi ne adjustments using white
balance compensation on the super control panel (P. 24).
63
All >
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
—
W Keep Warm
Color
Select [Off] to eliminate “warm” colors from pictures taken
under incandescent lighting.
—
#+WB Adjust white balance for use with a fl ash. —
Color Space You can select how colors are reproduced on the monitor
or printer.
—
MENU c
X