Olympus SH-25MR - Manual (Page 35)

35 EN
When the white area is not large enough or when the
color is too bright, too dark, or loud, the white balance
cannot be registered. Return to Step 2. Or, set the
other white balance.
Selecting the ISO sensitivity
1
Select the ISO setting option in the function
menu.
1/400 F3.0
0.0 0.0
MENU MENU
16 M
1/400 F3.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
3200
ISO ISO
HIGH
ISO ISO
HIGH 100
ISO ISO
100 3200
ISO Auto
2
Use HI to select the setting option, and
press the A button to set.
Option Description
ISO Auto
The camera automatically adjusts
the sensitivity according to the
shooting scene.
High ISO Auto
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
blur caused by a moving subject or
by camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.
ISO stands for International Organization for
Standardization. ISO standards specify the sensitivity
for digital cameras and fi lm, thus codes such as “ISO
100” are used to represent sensitivity.
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter button
is held down.
1
Select the drive option in the function menu.
0.0 0.0
MENU MENU
16 M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
Single
Option Description
o
One frame is shot each time the shutter
button is pressed.
)
The camera takes sequential shots at
approximately 2.3 frames/sec.
*
The camera takes sequential shots at
approximately 10 frames/sec.
c
The camera takes sequential shots at
approximately 15 frames/sec.
d
The camera takes sequential shots at
approximately 60 frames/sec.
+
(Auto Split
Shooting)
The camera takes up to 16 photos at
regular intervals while holding the shutter
button.