Olympus FE-340 - Manual (Page 37)

EN
37
Usi
ng OLY
M
PU
S Mast
er
Using OLYMPUS Master
Using the USB cable provided with your camera, you can connect the camera and computer and download
(transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera.
What is OLYMPUS Master?
OLYMPUS Master is a software application for managing your digital images on your computer.
Before installing the OLYMPUS Master software, please confirm that your computer is compatible with the
following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the back cover of this
manual.
Operating environment
Note
• Use a computer with a pre-installed operating system. Operations are not guaranteed on
home-built computers or computers with an updated operating system.
• Operations are not guaranteed when using an added USB port or IEEE 1394 port.
• To install the software, you must log on as a user with administrators’ privileges.
• If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon)
before performing the following operations. Failure to do so could result in unstable computer
operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery/card compartment cover
Install the OLYMPUS Master software
Windows Macintosh
OS Windows 2000 Professional/XP Home
Edition/XP Professional/Vista Mac OS X v10.3 or later
CPU Pentium III 500 MHz or later Power PC G3 500 MHz or later
Intel Core Solo/Duo 1.5 GHz or later
RAM 256 MB or more 256 MB or more
Hard disk capacity 500 MB or more 500 MB or more
Monitor 1,024 × 768 pixels or more
65,536 colors or more (16.77 million colors
or more recommended) 1,024 × 768 pixels or more
32,000 colors or more (16.77 million colors
or more recommended)
Other USB port or IEEE 1394 port
Internet Explorer 6 or later
QuickTime 7 or later recommended
DirectX 9 or later recommended USB port or IEEE 1394 port (FireWire)
Safari 1.0 or later (1.3 or later
recommended)
QuickTime 6 or later
Prepare the following items before starting.
OLYMPUS Master 2
CD-ROM
USB cable Computer that meets the operating
environment (P. 37).
For how to install the OLYMPUS Master software, refer to the installation guide included in the CD-
ROM.