Olympus PT-045 - Manual (Page 13)

EN 13
En
Using the fiber cable adapter
The fiber cable adapter is required when connecting the separately
available UFL-1 underwater flash to the Case using an underwater optical
fiber cable (optional: PTCB-E02).
How to install
1 Remove the white diffuser while pulling it up, then attach the optical
fiber cable adapter to the diffuser shown in the figure below.
2 Put the underwater optical fiber cable plug all the way into the optical
fiber cable (optional: PTCB-E02) insertion slot.
Remove the underwater optical fiber cable and attach the white diffuser
when you do not use it while taking picture.
PT-045_EN.book Page 13 Monday, December 8, 2008 11:50 AM