Olympus µ 810 - Manual (Page 53)

53
Conn
ect
ing
the came
ra
to a compu
ter
4
1
Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2
Connect the multi-connector on the camera to
the USB port on the computer using the
provided USB cable.
• Refer to your computer’s instruction manual to
locate the position of the USB port.
• The camera turns on automatically.
• The monitor turns on and the selection screen for
the USB connection is displayed.
3
Select [PC], and press
o.
4
The camera is recognized by the computer.
• Windows
When you connect the camera to your computer for
the first time, the computer attempts to recognize
the camera. Click “OK” to exit the message that is
displayed. The camera is recognized as a “Removable Disk”.
• Macintosh
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto
application starts automatically, so close this application and start
OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
• Connecting the camera to a computer via a USB hub may cause unstable
operation. In this case, do not use a hub, but connect the camera directly to the
computer.
Connecting the camera to a computer
Monitor
Multi-connector
Connector cover
OK
Ŝ Ŋ ŏ Ş
SET
U S B
PC
EASY PRINT
CUSTOM PRINT
EXIT