Brother PT-9400 - Manual (Page 77)

70
TROUBLESHOOTING
TROUBLESHOOTING
Problem Solution
(1) The display stays blank after you have
turned on the machine, or abnormal char-
acters are displayed.
● Check that the power supply cord is con-
nected.
● Reset the machine by turning it off, and
while holding down and , turn-
ing the machine back on.
☞ The text and formats in the display and
all text files stored in the memory are
erased.
(2) The text shown in the display cannot be
read.
● Use the Zoom mode to zoom in on the
text. Refer to page 21.
(3) The machine does not print or the printed
characters are blurred.
● Check that the tape cassette has been
inserted properly.
● If the tape cassette is empty, replace it
with a new one.
● Make sure that the tape compartment
cover has been closed.
(4) The text is printed on striped tape. ● You have reached the end of the tape in
the cassette. Replace it with a new one.
Code R