English, Specifications, Information to user – Pioneer CD-AH200 User Manual

Page 2: Important safeguards

Advertising
background image

Specifications

Operation temperature range
........–10 ºC to +60 ºC (+14 ºF to +140 ºF)
Storage temperature range
........–20 ºC to +80 ºC (–4 ºF to +176 ºF)

Dimensions

MHL adapter (W×H×D)
........41 mm × 15 mm × 45 mm
(1-5/8 in. × 5/8 in. × 1-3/4 in.)

Weight

MHL adapter .................50 g (0.1 lbs)

Note:

Specifications and design are subject to

possible modifications without notice

due to improvements.

Adapter cable

(HDMI Type A - D) × 1

MHL adapter × 1

Connecting the in-vehicle product using HDMI cables

Parts supplied

• Use only the cables included in this connectivity kit to ensure proper connection.

• Do not use the cables included in this connectivity kit for other models.

High Speed HDMI

®

Cable

(Type A - A) × 1

USB - micro USB cable

(Type USB A - micro USB B) × 1

High Speed HDMI

®

Cable

(Type A - A)
1.5 m (4 ft. 11 in.)

Adapter cable
(HDMI Type A - D)
0.75 m (2 ft. 6 in.)

USB - micro USB cable
(Type USB A - micro USB B)
0.75 m (2 ft. 6 in.)

Notes:

• The positions of the HDMI terminals

and USB port differ depending on the

in-vehicle product. For details of the ter-

minals’ positions, refer to the manual of

each product.

• The MHL adapter will not be used if you

use the adapter cable (HDMI Type A-D).

English

Notes:

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare
wiring to remain exposed.

• Route and secure all wiring so it can-

not touch any moving parts, such as
the gear shift, parking brake and seat
rails. Do not route wiring in places that
get hot, such as near the heater outlet.
If the insulation of the wiring melts or
gets torn, there is a danger of the wir-
ing short-circuiting to the vehicle body.

• Secure the High Speed HDMI

®

Cable

using the holder provided with your
vehicle’s unit.

Information to User

Alteration or modifications carried out with-

out appropriate authorization may invalidate

the user’s right to operate the equipment.

If you want to dispose this product,

do not mix it with general house-

hold waste. There is a separate

collection system for used elec-

tronic products in accordance with

legislation that requires proper

treatment, recovery and recycling.

Private households in the member states

of the EU, in Switzerland and Norway may

return their used electronic products free

of charge to designated collection facili-

ties or to a retailer (if you purchase a simi-

lar new one). For countries not mentioned

above, please contact your local authori-

ties for the correct method of disposal.

By doing so you will ensure that your dis-

posed product undergoes the necessary

treatment, recovery and recycling and

thus prevent potential negative effects on

the environment and human health.

WARNING:
Handling the cord on this product or

cords associated with accessories sold

with the product may expose you to

chemicals listed on proposition 65 known

to the State of California and other gov-

ernmental entities to cause cancer and

birth defect or other reproductive harm.
Wash hands after handling.

Important safeguards

This manual explains how to connect the

in-vehicle product via the connectivity kit.

For details of the operation of the con-

nected product, refer to another manual.

• Read this manual fully and carefully

before installing this product.

• Keep this manual handy for future reference.
• Pay close attention to all warnings in this

manual and follow the instructions carefully.

• Do not install this product where it may

(i) obstruct the driver’s vision, (ii) impair

the performance of any of the vehicle’s

operating systems of safety features,

including airbags, hazard lamp but-

tons, or (iii) impair the driver’s ability

to safely operate the vehicle. In some

cases, it may not be possible to install

this product because of the vehicle type

or the shape of the vehicle interior.

• Make sure that the cables and wires

are routed and secured so they will not

interfere with or become caught in any

of the vehicle’s moving parts, especial-

ly the steering wheel, shift lever, park-

ing brake, sliding seat tracks, doors, or

any of the vehicle’s controls.

Connecting the in-vehicle product using the MHL adapter

Notes:

• The positions of the HDMI terminals

and USB port differ depending on the

in-vehicle product. For details of the ter-

minals’positions, refer to the manual of

each product.

• The adapter cable (HDMI Type A-D) will

not be used if you use the MHL adapter.

MHL adapter

0.75 m (2 ft. 6 in.)

HDMI terminal

USB cable
(Type USB A - A)
1.5 m (4 ft. 11 in.)

USB port

HDMI terminal

USB port

USB cable
(Type USB A - A)
1.5 m (4 ft. 11 in.)

USB - micro USB cable
(Type USB A - micro USB B)
0.75 m (2 ft. 6 in.)

High Speed HDMI

®

Cable

(Type A - A)
1.5 m (4 ft. 11 in.)

USB cable

(Type USB A - A) Ч 1

Advertising