Brocade Mobility RFS6000 Controller Installation Guide - Manual (Page 28)

Rack mount instructions
4
20 Brocade Mobility RFS6000 Controller Installation Guide
53-1001573-03
Rack mount instructions
To install the Mobility RFS6000 Controller in a rack:
1. The rack mounting brackets are installed at the factory. No additional steps are
needed.
2. Attach the brackets to the rack using screws appropriate for your rack’s
mounting holes.
Mobility RFS6000 Controller console port setup
To add the Mobility RFS6000 Controller to the network and prepare it for initial
configuration:
1. Using the supplied console cable (pictured below), connect the Mobility
RFS6000 Controller serial port to an RS-232 (DB-9) serial port on a separate
computer (the “configuration computer”).