Blaupunkt C51 - Manual (Page 8)

8
Switching on by means of cassette
insertion
If there is no cassette in the deck when
the device is switched off,
➮
press the button,
9
.
The flip-release panel opens.
➮
Insert the cassette with the open
side to the right gently into the
drive until you can sense some re-
sistance.
The cassette is automatically drawn into
the drive.
As the cassette is drawn in, it must nei-
ther be held back nor assisted.
➮
Close the panel with gentle pres-
sure until you feel it engage.
The device switches on. Cassette play
starts.
Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button
3
, it will switch on/off
simultaneously with the ignition.
You can switch the unit on even if the
ignition is off:
➮
To do so, press button
3
.
Note:
●
To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
Switching on/off using the
removable control panel
➮
Remove the control panel.
The unit switches off.
➮
Attach the control panel again.
The unit switches on. The last settings
(radio, Cassette, CD changer or AUX)
will be reactivated.
Switching on/off using button 3
➮
To switch the unit on, press button
3
.
➮
To switch the unit off, press button
3
for longer than two seconds.
The unit switches off.
SWITCHING ON/OFF