Pioneer DVJ-X1 - Manual (Page 16)

Before Operating (Connections)
12
En <DRB1359>
MODE
OUT
L
Y C B C R P R P B
R
S
S
SYNC IN
AUDIO OUT VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ NORMAL
CONTROL
MODE
OUT
L
Y C B C R P R P B
R
S
S
SYNC IN
AUDIO OUT VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ NORMAL
CONTROL
L
R
AUDIO OUT
L
R
AUDIO OUT
CONTROL
CONTROL
DJM-600
DVJ-X1
B
DVJ-X1
A
Connections
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connections to DJ mixer (DJM-600, DJM-500, DJM-300, DJM-909, DJM-707
or DJM-3000) (audio output and control connector)
Using the accessory audio cable, connect the white plug to the L (left) connector, and connect the red plug to the R (right) connector.
By connecting the accessory control cord, the player can be controlled from the mixer, allowing fader start play and back cue operations.
Connection example DJM-600:
Accessory
audio cable
Accessory control cord
¶ Connect similarly to the above when using DJM-300 or DJM-500.
¶ When connecting DJM-909 or DJM-707, use the accessory audio cable to connect CH-1 CD to PLAYER A, and the CH-2 CD to
PLAYER B.
¶ In the case of the DJM-3000, connect A PLAYER to LINE 1 of CH-1, connect B PLAYER to LINE 3 of CH-2.
¶ When connecting this player to other audio mixers, the player’s AUDIO OUT connector should be connected to the mixer’s LINE IN
connector or AUX connector (★ Do not connect the player to a mixer’s PHONO connector, since sound will be distorted and
proper playback will not result).
2. Control cord connection for relay play
By using the accessory control cord to connect two DJ players, automatic relay play can be performed between the two units. (☞ P.38)
MODE
OUT
L
Y C B C R P R P B
R
S
S
SYNC IN
AUDIO OUT VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ NORMAL
CONTROL
MODE
OUT
L
Y C B C R P R P B
R
S
S
SYNC IN
AUDIO OUT VIDEO OUT
COMPOSITE
PREVIEW OUT
DIGITAL
DJ NORMAL
CONTROL
CONTROL CONTROL
DVJ-X1 DVJ-X1
Accessory control cord