Pioneer VSX-859RDS-G - Manual (Page 32)

32
En
Initial Set up
ASSIGN SETUP:
Digital In Select (See p. 33)
In order to use your digital components you must match the
numbered digital input settings with the numbered digital jacks
used by your digital components.
Multi Channel In (See p. 34)
This is for hooking up a multi channel external decoder that
may give you higher quality when decoding discs. This feature
lets you select adjustable to non-adjustable sound.
Component-In Select (VSX-859RDS only) (See p. 35)
In order to use component video connections you must tell the
receiver which components are hooked to which terminals.
SURROUND SETUP:
Speaker Setting (See p. 36 – 37)
Use to specify the type and number of speakers you connected.
Channel Delay (See p. 38)
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p. 39 – 40)
Use to balance the volumes of your different speakers.
Crossover Network (See p. 41)
This feature lets you select which bass frequencies will be sent
to the subwoofer or front speakers.
Bass Peak Level (See p. 42)
Dolby Digital, DTS and MPEG audio sources include ultra-low
bass tones. Set the bass peak level as needed to prevent the
ultra-low bass tones from distorting the sound from the
speakers.
D-Range Control (See p. 43)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
FUNCTION RENAME (See p. 87 – 88)
This feature lets you rename specific "functions," which in this
case stands for components like DVD/LD, VCR 1, etc. This is a
useful feature for matching the remote control and receiver
display exactly with your home setup.
4 Go on to the next page to start the set up.
If you don't want to make any settings go can exit this setup.
To exit the SYSTEM SETUP MENU and on-screen display press
SYSTEM SETUP button again.
memo
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/ CH SEL
SIGNAL SELECT
+
–
4
/DTS/MPEG
(to exit
SYSTEM
SETUP)
SOURCE
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL TV
EFFECT/CH SEL
RECEIVER
MASTER VOLUME
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
0
TV VCR
1 VCR
2
4
DISC +10
VSX-859RDS
VSX-839RDS
(to exit
SYSTEM
SETUP)
(VSX-859RDS only)
After you complete one of the
SYSTEM SETUP menus and return
to the basic SYSTEM SETUP screen
the receiver automatically moves
the cursor to the next SYSTEM
SETUP menu. For example, if
you've completed SPEAKER
SETTINGS and returned to the basic
SYSTEM SETUP screen, CHANNEL
DELAY will be selected automatical-
ly. You can notice this on your TV
screen or your front panel display.