Pioneer BCS-FS505 - Manual (Page 17)

17 Installation
3
Installation
3. Insert the speaker cord from the hole
behind the base through to the pole and
connect it to the speaker terminal. After
connecting, put the speaker wire in the
gap on the back side of the speaker.
Match the colour tube on the wire with the
colour indicator on the label, then insert
the white wire with gray line into the red
(+) side and the other wire into the black (-)
side.
4. Secure the speaker and the pole with 2
screws.
Ensure that the speaker wire does not get
pinched between the speaker and the pole.
5. After connecting, put the speaker wire
in the back of the base of the stand.
6. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic fi nger pad to open the connection
terminal. Insert the wire and release the
fi nger pad.
White (+)
Orange (+)
Black (–)
Red (+) Red (+)
Black (-)
Orange (+)
White (+)
CAUTION
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifi er other than the one supplied with this
system. Connection to any other amplifi er may
result in malfunction or fi re.
HB485-DB.BGBRPPK.indd 17 HB485-DB.BGBRPPK.indd 17 2010-05-14 9:43:37 2010-05-14 9:43:37