Pioneer RCS-656HX - Manual (Page 146)

Additional information 17
146
En
Timer program doesn’t record
successfully • When setting the recording channel, make sure you set the recorder’s built-in TV
tuner, not the TV’s built-in tuner.
• When recording to a Video mode disc, programs that are copy-once protected
cannot be recorded. Use a VR mode formatted disc for copy-once material (page 79).
• Two timer programs may have overlapped, in which case only the earlier one will
record completely.
• The power may have failed during recording.
After briefly unplugging or after
a power failure the front panel
display shows ‘--:--’ • A backup battery inside the recorder keeps the clock and other settings from being
reset when there is no power to the recorder. After unplugging or a power failure, the
battery keeps all settings for a period of several minutes. Reset the clock and other
recorder settings to use the recorder again.
Front panel display shows
‘LOCK’ when a button is pressed • The Child Lock is on; turn off in order to use the recorder (page 71).
Can’t use One Touch Copy (HDD
to DVD) • Make sure that there is a recordable DVD-R/-RW loaded with some free space for
recording and fewer than 99 titles already on the disc. Also make sure that for a Video
mode disc or a DVD+R, the disc isn’t finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some free space for
recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of remaining recordable
titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that there isn’t a
disc menu on the disc you’re trying to use.
• If the title currently playing contains material that is copy-once protected, One Touch
Copy will not work.
• One Touch Copy can’t be used for titles over 8 hours long when copying to DVD+R/
+RW (though you can use a DVD+R DL).
• One Touch Copy can’t be used for
MN1 to MN6, SEP, SLP or EP titles when copying
to DVD+R/+RW.
• One Touch Copy doesn’t work if the recorder is already recording to DVD.
Can’t use One Touch Copy (DVD
to HDD) • Make sure that there is space available on the HDD and that there are fewer than
999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to the HDD.
The picture freezes and the front
panel and remote control
buttons stop working • Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power off, then switch
back on and restart playback. If the power fails to switch off, press and hold
STANDBY/ON for 5 seconds until the power switches off.
A device connected via USB does
to function. • Check that it is a device that may be connected to this unit (digital camera, USB
memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader connected is
readable by this unit. Unplug multiple devices and connect the device you want to
use first.
Problem Remedy