Pioneer P1-S - Manual (Page 4)

4
En
•When installing this unit, make sure to put it
on a level and stable surface.
Don ’ t install it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device
that gives off a magnetic field). This may
interfere with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other
movement
– in places that are very dusty or that have
hot fumes or oils (such as a kitchen)
Switching the unit between standby and on
  Press u SYSTEM (1) to turn on the stereo receiver and CD player.
  Press u RECEIVER (1) to turn on the stereo receiver only.
  Press u CD (1) to turn on the CD player only.
Setting the clock
1. Press CONTROL RCV (a).
2. Press CLOCK (4) and press ENTER (6).
3. Use k/l and ENTER (6 ) to adjust the day of the week and time.
Control the display brightness
1. Press CONTROL RCV (for the stereo receiver) (a) or CONTROL CD (for the CD player) (a).
2. Press DIMMER (d) to switch the display brightness in four steps.
Control sound and adjust volume
  Press DIRECT (b) to listen to the sound source in the original sound quality.
  Press TREBLE +/– (c) or BASS +/– (c ) to adjust sound quality.
  Press VOLUME +/– (e) to adjust the listening volume.
  Press MUTE (e) to mute the sound.
Listening to the audio CD
1. Press CD/USB (2).
2. Press CD USB (2) to select CD function for the CD player.
3. Press h OPEN/CLOSE (9) to open the disc tray, and place a disc.
4. Press d (7) to start playback. Use numeric buttons (8) or o/p (7) to select a track.
5. Press REPEAT (f) or SHUFFLE (g ) to adjust the play mode.
Playing iPod/iPhone/iPad mini/USB device
1. Press CD/USB (2).
2. Press CD USB (2) to select iPod/USB function for the CD player, and connect your iPod/iPhone/iPad
mini/USB device to the iPod/iPhone/iPad mini/USB terminal.
3. Press d (7) to start playback.
Listening to the radio
1. Press TUNER (3).
2. Press CONTROL RCV (a), and press BAND (3) to select a band (FM MONO or FM STEREO).
3. Use TUNE i/j (6) to tune.
Listening to DAB (XP-01DAB only)
1. Press TUNER (3).
2. Press CONTROL RCV (a), and press BAND (3) to select DAB.
3. Press TUNE i/j (6) to select a DAB service, and press ENTER (6).
  When listening to DAB for the first time, press AUTO TUNE (5) instead of the operation in step 3.
14
10
12
11
15
16
13
9
1
5
6
7
3
2
4
8
The batteries included with this unit are to
check initial operations; they may not last
over a long period. We recommend using
alkaline batteries that have a longer life.
CAUTION
•Incorrect use of batteries may result in
such hazards as leakage and bursting.
Observe the following precautions:
– Never use new and old batteries together.
– Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
– Batteries with the same shape may have
different voltages. Do not use different
batteries together.
– When inserting the batteries, make
sure not to damage the springs on the
battery’s (–) terminals. This can cause
batteries to leak or overheat.
– When disposing of used batteries, please
comply with governmental regulations or
environmental public institution’s rules
that apply in your country/area.
WARNING
•Do not use or store batteries in direct
sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the
life or performance of batteries.
Installing the unit Loading the batteries
Basic control
XC_P01_P01DAB_QSG.indb 4 2012/12/21 13:32:43