Pioneer DEH-P7900UB - Manual (Page 32)

1 Use MULTI-CONTROL to select ASL.
2 Press MULTI-CONTROL to turn ASL on.
Mid appears in the display.
# To turn ASL off, press MULTI-CONTROL
again.
3 Push MULTI-CONTROL left or right to
select the desired ASL level.
Each time
MULTI-CONTROL is pushed left or
right, ASL level is selected in the following
order:
Low (low)
—Mid-L (mid-low)—Mid (mid)—
Mid-H (mid-high)
—High (high)
Initial Settings
Adjusting initial settings
1 1 1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL to switch between the
functions in the following order:
Language select (language selection)
—Clock
(clock)
—Off clock (off clock)—FM step (FM
tuning step)
—Auto PI (auto PI seek)—
Warning tone (warning tone)
—
Face auto open (face auto open)
—AUX1
(auxiliary input 1)
—AUX2 (auxiliary input 2)—
Dimmer (dimmer) —Brightness (brightness)
—S/W control (rear output and subwoofer
controller)
—Mute (sound muting/attenua-
tion)
—Demonstration (feature demo)—
Reverse mode (reverse mode) —Ever-scroll
(ever scroll)
—BT AUDIO (Bluetooth audio)—
Pin code input (pin code input)
Use the following instructions to operate each
particular setting.
# You can also select the function by pressing
FUNCTION on the remote control.
# BT AUDIO and Pin code input can be se-
lected only when Bluetooth adapter (e.g., CD-
BTB100) is connected to this unit.
# To cancel initial settings, press BAND.
Operating this unit
En
32
Section
02