Pioneer AVH-X2600BT - Manual (Page 73)

Bluetooth connection
menu operations
(Function of AVH-X5600BT/AVH-X3600DAB/
AVH-X2600BT)
Note
If you are using a cellular phone that can be con-
nected via Bluetooth wireless technology, we re-
commend that you use your phone to search for
this unit and establish a connection between it
and your phone. The PIN code is set to
0000 as
default. The product name for this unit will dis-
play on your phone as the device name. For de-
tails, refer to Entering PIN code for Bluetooth
wireless connection on page 74. For further details
concerning the procedures for establishing
Bluetooth wireless connections, refer to the in-
struction manual for the phone.
Pairing from this unit
1 Press the home button to switch to the
home display.
2 Touch the Bluetooth key to open the
Bluetooth connection menu.
3 Touch Connection to select a device.
4 Start to search.
Starting to search.
While searching, is displayed and when
available devices are found, the device names
or Bluetooth device addresses (if names can-
not be obtained) are displayed.
# If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.
Switching between the device
names and Bluetooth device ad-
dresses.
# To cancel searching, touch Stop.
# If three devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to page 73.
# If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.
5 Touch a device name to select the de-
vice you want to connect to.
While connecting,
Pairing is displayed. If the
connection is established, Paired is displayed.
# If your device support SSP (Secure Simple
Pairing), six-digit number appears on the display
of this unit. Once the connection is established,
this number disappears.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on page 74.
# Once the connection is established, the de-
vice name is displayed.
Touch the device name to disconnect.
# If you want to delete a paired Bluetooth tele-
phone, display
Delete OK?. Touch Yes to delete
the device.
Deleting a paired device.
# Never turn the unit off while the paired
Bluetooth telephone is being deleted.
Connecting to a Bluetooth
device automatically
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1 Press the home button to switch to the
home display.
En
73
Section
21
Bluetooth
connection
menu
Bluetooth connection menu