Scan to ftp – Brother DCP 8060 User Manual
Page 175
10. Network Scanning (Not available for DCP-8060)
169
Scan to FTP
10
When you choose Scan to FTP, you can scan a black and white or colour document directly to an FTP server
located locally on your network or on the internet.
The details required to use Scan to FTP can be entered manually at the control panel or by using Web Based
Management to pre-configure and store the details in an FTP Profile.
For information on how to manually enter the Scan to FTP details, see Scan to FTP Manual Method on page
171. To use Web Based Management, type http://IP address on the machine/ into your browser, and then
you can configure or change the settings in the Administrator Settings. You can configure up to ten FTP
server Profiles.
a
Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
b
The Host Address is the domain name of the FTP server. Enter the Host Address (for example
ftp.example.com) (up to 60 characters) or the IP address (for example 192.23.56.189).