07 setup, Interface for setup menu, Changing a setting – Pioneer X-EM21V User Manual

Page 20: System setup, Setup, Setup 07, Chapter 7

Advertising
background image

Setup

07

20

En

Chapter 7:

Setup

Interface for setup menu

After you press SYSTEM MENU, the interface for the setup

menu is displayed as follows.

On the top: Icons for main menus

for [SYSTEM SETUP] menu

for [LANGUAGE SETUP] menu

for [AUDIO SETUP] menu

for [DIGITAL SETUP] menu

In the middle: Name of the current main menu
On the left: Items under the current menu
On the right: Setting options

Changing a setting

Note

• If a menu item or setting option is grayed out, it means

that the setting cannot be changed at the current state.

1

Press SYSTEM MENU.

• To access another main menu, press

/ to select its

icon.

2

Press

/ to select a menu item.

3

Press ENTER.

• If a dialog box is displayed, follow the instructions to

operate.

4

Press

/ to select your setting option.

5

Press ENTER to confirm.

• To exit the menu, press SYSTEM MENU.

System setup

[TV SYSTEM]
Select a TV system that matches your TV.

[TV TYPE]
Select a display ratio that matches your TV screen.

[VIDEO]
Select a video output mode.

• [INTERLACE-YUV] – Select this when your TV that does

not support progressive video signals is connected to the
COMPONENT VIDEO OUT

terminals.

• [P-SCAN YPBPR] – Select this when your TV supporting

progressive video signals is connected to the
COMPONENT VIDEO OUT

terminals.

Note

• If the picture does not display after setting this to

progressive, connect the TV to the composite terminal,

display the setup menu, then set this back to interlace.

[SCREEN SAVER]
Protect the TV screen from damage due to over exposure to

static image.

• [ON] – Enable the screen saver.
• [OFF] – Disable the screen saver.

[PASSWORD]
Set a password to restrict the play of rated discs to children.

The default password is “0000”. You can change the 4-digit

password.

1

Press SYSTEM MENU.

2

Select

> [PASSWORD], and then press

ENTER.

3

Enter the current password with the

numeric keys (0-9), and then press ENTER.

• If you forget the password, enter “0000”.

4

Enter the new password.

5

Press ENTER to confirm.

6&5((1 6$9 (5

797<3(

3$66:25'
5$7, 1*
3,&785(086,&
'()$8/7

796<67(0

9,'(2

X-EM21V_SYXE8_En.book Page 20 Tuesday, July 31, 2012 9:43 AM

Advertising