Pioneer AVIC-70D-2 - Manual (Page 9)

Connecting to the display with 20-pin RGB input (AVIC-9DVD 2 2 )
8
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ENG/MASTER 96 9
Please make sure to com-
plete this connection.
Otherwise you cannot see
the image of the DVD-
Video.
Audio output
Video output
Microphone
☞
See page 24.
GPS aerial
☞
See page 19.
RCA cable
(sold separately)
CD-RGB26P
(sold separately)
RGB output (Green)
Use this jack when
connecting the
Pioneer display.
Green
Power cord
This product
☞
See pages 9-11.
Level Control
This is used for adjusting output from Audio
Output. If you turn it to the right, the volume
increases, while turning it to the left reduces the
volume. (Normally, turn it fully to the right, and
instead use the external equipment outputting
sound, such as a display, for adjusting the vol-
ume.)
Antenna jack
15 cm
Note:
If you use equipment other than this unit
that require the connection of FM aerial,
use an adequate aerial distributor available
in the shops.
To RGB input of the
display.
To Audio inputs.
To VTR input of the
display.
CRD3647A_inst_001_029_UK 4/15/02 2:03 PM Page 9