Pioneer DVH-3200UB - Manual (Page 28)

! With some discs, the parental lock may be ac-
tive only for certain levels of scenes. The play-
back of those scenes will be skipped. For
details, refer to the instruction manual that
came with the disc.
Changing the level
You can change the set parental lock level.
1 Move the thumb pad up or down to select PAR-
ENTAL in GEN.
2 Click the thumb pad
Parental lock setting menu is displayed.
3 Press 0 to 9 to input the registered code number.
4 Move the thumb pad left or right to move the cur-
sor to the previous or next position.
5 Click the thumb pad after entering the four digit
code number.
This sets the code number, and the level can now
be changed.
! If you input an incorrect code number, the
icon is displayed. Input the correct code
number.
! If you forget your code number, refer to If you
forget your code number on this page.
6 Move the thumb pad left or right to select the de-
sired level.
7 Click the thumb pad
The parental lock level is set.
If you forget your code number
Please see the following section, and press CLEAR 10
times in the parental lock setting menu. Refer to
Changing the level on this page. The registered code
number is canceled, letting you register a new one.
Setting the DivX subtitle file
You can select whether or not to display DivX external
subtitles.
! The DivX subtitles will be displayed even when
CUSTOM is selected if no DivX external subtitle
files exist.
1 Move the thumb pad up or down to select DivX
SUBTITLE in GEN.
2 Click the thumb pad to select whether to display
DivX external subtitles or not.
! ORIGINAL – Display the DivX subtitles
! CUSTOM – Display the DivX external subtitles
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.
Setting for digital output
Audio which is outputted from digital output of this
unit can be selected. Normally, set to
STREAM. If this
unit ’s digital output is not used, there is no need to
change settings.
! Selecting Linear PCM enables you to switch the
output channel if playing the following type of
discs. (Refer to
LR SELECT (audio output) on page
20.)
! Dual mono mode DVD video discs
! Bilingual DVD-VR discs
1 Move the thumb pad up or down to select IEC DI-
GITAL OUTPUT in GEN.
2 Click the thumb pad to select the desired digital
output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! Linear PCM – The Dolby Digital/DTS signal is
converted to and output as a linear PCM sig-
nal
En
28
Section
02 Operating this unit