Pioneer AVH-X2650BT - Manual (Page 54)

Black plate (54,1)
! Turn the ignition switch OFF and then to ACC
or ON.
If the error message is still displayed after
performing the above action, reset the
smartphone.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
USB connection was temporarily disabled for de-
vice protection. Do not connect this USB device
to the unit. To restart USB, restart the unit.
There is an over current error. Do not use this USB
storage device.
Turn the ignition switch OFF and then to ACC or
ON.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
Understanding auto EQ error
messages
When correct measurement of the car ’s interior
acoustic characteristics is not possible using
auto EQ, an error message may appear on the
display. In such cases, refer to the table below to
see what the problem is and how it may be cor-
rected. After checking, try again.
Error messages are written in bold and causes
in regular, non-indented text. Regular, indented
text is used to indicate actions to be taken.
Please connect the microphone for
measurement. When finished, please push
HOME key.
The microphone is not connected.
Plug the optional microphone securely into the
jack.
Error. Please check xxxx speaker.
The microphone cannot pick up the measuring tone
of a speaker.
! Confirm that the speakers are connected
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Plug the microphone securely into the jack.
Error. Please check noise.
The surrounding noise level is too high.
! Stop your car in a place that is quiet, and
switch off the engine, air conditioner and heater.
! Set the microphone correctly.
Error. Please check battery.
Power is not being supplied from the battery to this
unit.
! Connect the battery correctly.
! Check the battery voltage.
Understanding messages
Messages Translation
Screen image may appear re-
versed.
Pioneer rec-
ommends
the use of a
camera
which out-
puts mirror-
reversed im-
ages. Other-
wise, the
screen
image will
appear re-
versed.
Indicator list
Area 1 Area 2
Area 3
Area 1
Indicates that the mute func-
tion is on.
Indicates that the sound is at-
tenuated.
Area 2
Indicates that the digital for-
mat is Dolby Digital.
Indicates that the digital for-
mat is MPEG Audio.
Indicates that the digital for-
mat is Linear PCM.
Indicates the sampling fre-
quency.
Indicates that the digital for-
mat is DTS.
Indicates the audio channel.
Indicates that a disc with PBC
On is being played.
! Indicates that a cellular
phone is connected.
! Indicates that an incoming
call has been received and
has not been checked yet.
Indicates the battery strength
of the cellular phone.
! The level shown on the indi-
cator may differ from the
actual battery strength.
! If the battery strength is not
available, nothing is dis-
played in the battery
strength indicator area.
Indicates that the connected
Bluetooth device only supports
Bluetooth telephone.
Indicates that the connected
Bluetooth device only supports
Bluetooth audio.
Indicates that the unit is cur-
rently processing an operation
such as search.
Additional information
54
Appendix
Additional information
En
<CRD4760-A>54