Pioneer AVIC-HD3 RU - Manual (Page 133)

131
AV
Chapte
r
13
Customising the
Aud
io Se
tting rela
ted
with Audio Visual
3
Touch  or  to select the equaliser band
to adjust.
Each time you touch  or  selects equaliser
bands in the following order:
Low — Mid — High
4
Touch  or  to select the desired centre
frequency.
Low: 40 — 80 — 100 — 160 (Hz)
Mid: 200 — 500 — 1K — 2K (Hz)
High: 3.15K — 8K — 10K — 12.5K (Hz)
5
Touch  or  to adjust the level of the
equaliser band.
Each time you touch  or  increases or
decreases the level of the equalisation band.
+12dB to –12dB is displayed as the level is
increased or decreased.
6
Touch  or  to select the desired [Q].
Touch  or  until the desired the curve char-
acteristics appears in the display.
Wide2 — Wide1 — Narrow1 — Narrow2
❒ To adjust other bands, repeat step 3 to step
6.
Setting the simulated sound
stage
You can select the desired effect from various
simulated sound stage, such as Music Studio or
Dynamic Theatre. You can also adjust a listener
positioning effect.
Setting a stage that fits your image
1
Touch [Staging] in the Audio Settings
menu.
2
Touch desired stage setting.
❒ The [Living Room] setting that empha-
sises midrange sound hardly has any
effect near the maximum volume level.
❒ When you set staging to an option other
than [Off], the high pass filter (HPF) set-
ting turns [Off].
➲ “Using the high pass filter” ➞ Page 132
Adjusting a position effect
You can select a listener position that you want to
make as the centre of sound effects.
1
Touch [Staging] in the Audio Settings
menu.
2
Touch [Position].
3
Touch desired position.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1
Touch [FAD/BAL] in the Audio Settings
menu.
The FAD/BAL screen appears. When Rear SP
(the subwoofer controller setting in System
Settings menu) is Sub.w, the Balance will
be displayed instead of FAD/BAL.
➲ “Setting the rear output and subwoofer
controller” ➞ Page 138
2
Touch  or  to adjust front/rear speaker
balance.
Each time you touch  or  moves the front/
rear speaker balance towards the front or the
rear.
Front: 15 to Rear: 15 is displayed as the
front/rear speaker balance moves from front
to rear.