Pioneer CNDV-900HD - Manual (Page 15)

15
Renewed Points through this Upgrade
3. Touch [OK].
The route is recalculated, and “Route
confirmation screen” appears.
❒
The system may calculate a route that
includes streets or bridges that are subject
to traffic restrictions during a certain time
even if [On] is selected.
!CAUTION
If the time difference is not set correctly,
the navigation system cannot consider
traffic regulations correctly. Set the time
difference correctly. (For details, refer to
Operation Manual of your navigation
system.)
shows for routes that contain streets or
bridges that are subject to traffic regulations
during a certain time when the setting [Time
restrictions] is [On].
2D Twin Map View and 3D
Twin Map View
Either “2D Twin Map View” or “3D Twin Map
View” can directly be selected in “View Mode
Selection” screen.
1. Press the MAP button to display a map of
the area around your current position.
2. Press the MAP button again.
3. Touch the mode name to select the mode
you want to display.
2D Twin Map View
The 2D map appears on the left screen.
3D Twin Map View
The 3D map appears on the left screen.
❒
Touching anywhere on the map changes
the map to “Scroll mode”.
Address Book Icon
You can select whether to display the Address
Book Icon on the map.
❒
When you select [Address Book Icon
Display] in [Short-Cut Selection], you can
switch this setting with the shortcut menu.
1. Touch the key in the following order in the
navigation menu.
[Map]
➞ [Displayed Info]
2. Touch [Address Book Icon].
Each time you touch the key changes that
setting.
• [On]*:
Displays the icon on the map.
• [Off]:
Hides the icon from the map.
❒
Even if [Address Book Icon] is set to [Off],
the alarm sounds when you approach the
registered location and the set image pops
up. To turn off the sound output and image
pop up, select [No Sound] and [No
Picture] for the entry.
❒ If you set (dot), the registered name of
that entry can be displayed on the map. The
MAN-CNDV-900HD-EN.fm Page 15 Monday, August 10, 2009 9:49 AM