Pioneer VSX-921 - Manual (Page 25)

25
Troubleshooting (Continued)
Cause 1:
An error message may appear if there are not enough system resources
available.
Restart the computer, and with no other applications launched, launch the update file.
Cause 2:
Updating of Advanced MCACC may fail because of incompatibilities with other
applications.
Try the following, in the order indicated.
1) If there are any other applications active, exit the other applications and try starting the update file
again.
2) If that does not work, try restarting your PC, and starting the update file with no other applications
active.
Cause:
It is not possible to print reverb characteristics graphs displayed in the “ALL”
mode.
Print after selecting an individual channel or frequency graph.
Cause:
You may not properly use the application software not corresponding to your
receiver.
Check the model number of your receiver and use the application software corresponding to it.
AVNavigator cannot be updated
Reverb characteristics graph cannot be printed
Some functions in application operation cannot be used
ALL display
Continue