Performing auto eq 109, Audio adjustments, Performing auto eq – Pioneer AVH-X8600BT User Manual

Page 109

Advertising
background image

— Front speakers (left/right)

— Rear speakers (left/right)

— Noise

— Microphone for acoustical measure-

ment (sold separately)

— Low battery

Performing Auto EQ

p Auto EQ changes the audio settings as fol-

lows:
— “Auto EQ&TA” is set to “On”.

= For details, refer to Using the auto-ad-

justed equaliser on page 107.

— The fader/balance settings return to the

centre position.

= For details, refer to Using balance ad-

justment on page 100.

— The equaliser curve switches to “Flat”.

= For details, refer to Using the equali-

ser on page 106.

— The front and rear speakers will automa-

tically be adjusted to a high pass filter
setting.

p Previous settings for Auto EQ will be over-

written.

p Do not press the h button to open or close

the panel when you are using the micro-
phone.

CAUTION

Do not turn off the engine while the measure-
ment is in progress.

1

Stop the vehicle in a quiet place, close

all the doors, windows and sun roof, and
then turn the engine off.
If the engine is left running, engine noise may
prevent correct Auto EQ.

p If driving restrictions are detected during

measurement, measurement is cancelled.

2

Fix the microphone for acoustical mea-

surement (sold separately) in the centre of
the headrest of the driver

’s seat, facing for-

ward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.

3

Disconnect the iPhone or smartphone

device.

4

Turn on the ignition switch (ACC ON).

If the vehicle

’s air conditioner or heater is

turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.

5

Switch the AV source to

“OFF”.

= For details of the operations, refer to Dis-

playing the AV operation screen on page 20.

6

Press the HOME button to display the

Top menu screen.

7

Touch the following keys in the follow-

ing order.

The

“Audio” screen appears.

8

Touch [A-EQ&TA Measurement].

The

“A-EQ&TA Measurement” screen ap-

pears.

Engb

109

Chapter

20

Audio

adjustments

Audio adjustments

Advertising