Pioneer CP-81B-K - Manual (Page 4)

4
En
When using speaker spikes:
To avoid accident or injury, please use screws to secure the
speaker to the speaker stands. Note that there are fastening nuts
provided on the speaker base (see below).
Secure the speaker to the speaker support using the washer,
spring washer and the 50 mm (2 in.) screws as shown below.
When not using speaker spikes:
To avoid accident or injury, please use screws to secure the
speaker to the speaker stands. Note that there are fastening nuts
provided on the speaker base (see below).
Secure the speaker to the speaker support using the washer,
spring washer and the 40 mm (1 5 /
8
in.) screws as shown below.
50 mm
(2 in.)
Black
Speaker
support
Fastening nut
Screw holes for
securing speaker
Washer [SBE1043]
Spring washer [SBE1042]
Screws (Bind head, M4 x L50)
[SBA6012]
Speaker
spike base
40 mm
(1
5 / 8 in.)
Black
Speaker
support
Fastening nut
Screw holes for
securing speaker
Washer [SBE1043]
Spring washer [SBE1042]
Screws (Bind head, M4 x L40)
[SBA6011]
FRRD-235-A_CP-81_En.book 4 ページ ２００８年７月２４日 木曜日 午後２時１５分